The toluene diisocyanate has 2,4-toluene diisocyanates and 2,6-toluene diisocyanate (TDI).

There are two isomers of 2,4-toluene diisocyanate and 2,6-toluene diisocyanate (TDI). According to the content of the two isomers, there are three standard products in the industry: (1) TDI-65 contains 2,4-TDI65%, 2,6-TDI35%; (2) TDI-80 contains 2,4- TDI80%, 2,6-TDI20%, more common; (3) TDI-100 contains 2,4-TDI100%. Carbon dioxide occurs with water effect. Easy to work with compounds containing active hydrogen atoms. Linear polyurethane or polyurethane resin with diol effect.

Miscible with ether, diethylene glycol, acetone, carbon tetrachloride, benzene, chlorobenzene, kerosene and olive oil. It can react with hydroxyl-containing compounds, water, amines and compounds with active hydrogen atoms to generate carbamate, urea, semicarbazide, etc. Toluene is nitrated with mixed acid to obtain 2,4- and 2,6-dinitrotoluene, and then hydrogenated and reduced in the presence of nickel catalyst to obtain 2,4- and 2,6-diaminotoluene, which is then reacted with light in chlorobenzene solution. produced by gas reaction.

Dibenylmethane diisocyanate, referred to as "MDI", is an organic substance, a chemical formula C15H10N2O2.

M-xylene is an organic compound with a molecular formula C8H10, a molecular weight of 106, a colorless concussion liquid, a odor like toluene.

The lactic acid transport speed is affected by a series of factors, and includes a monocarboxy-dient, lactate dehydrogenase concentration and isomer form, and the oxidative capacity arranged. Generally, the concentration of lactic acid in the blood is from 1-2 mmol / L during non-exercise, and can rise to 20 mmol / L during intense exercise.

The lactate dehydrogenase is converted to a left lactic acid during the fermentation process. Lactic acids are constantly occurring in general metabolism and motion, but its concentration generally does not rise. Only in the lactic acid occurs, lactic acid cannot be transported in time to increase. The lactic acid transport speed is affected by a series of factors, and includes a monocarboxy-dient, lactate dehydrogenase concentration and isomer form, and the oxidative capacity arranged.

Nitrogen, chemical formula is n₂, which is a colorless tasteless gas.

Sodium Persulfate is also called sodium sulfate, is an inorganic substance, a chemical formula is Na2S2O8, and the appearance is a white crystal powder, odorless.

Can gradually decompose, moist and high temperatures can accelerate decomposition. Can be decomposed by ethanol and silver ion.White crystalline powder.

Sodium peroxide is an inorganic substance with a chemical formula of Na2O2 and a molecular weight of 77.98. Beige powder or granules. The relative density is 2.8.

When the temperature drops to 2.18K, the properties of liquid helium will change suddenly, the viscosity is very small, and it becomes a super fluid that can flow upwards along the wall of the container. The thermal conductivity is 800 times that of copper. It becomes a thermal conductor with excellent thermal conductivity. Its specific heat capacity, surface tension, and compressibility are all abnormal. This abnormal liquid is called liquid helium II, and the normal liquid helium is called liquid helium I.

It uses oxygen with a purity of 93.5%-99.2% and combustible gas (such as acetylene) to produce a flame of extremely high temperature, thereby melting the metal. The metallurgical process cannot do without oxygen. In order to strengthen the production of nitric acid and sulfuric acid, oxygen is also required. Instead of using air, a mixture of oxygen and water vapor is blown into the coal gasifier to obtain coal gas with high calorific value.

HCFC-141b (monofluorodichloroethane) is a high-purity liquid widely used in cleaning and solvent fields.

It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.

From the perspective of physics, the methods to eliminate foam mainly include placing baffles or filters, mechanical stirring, static electricity, freezing, heating, steam, radiation, high-speed centrifugation, pressure and decompression, high-frequency vibration, instantaneous discharge and ultrasonic (acoustic) Liquid control), etc., these methods promote the gas permeation rate at both ends of the liquid film and the drainage of the bubble film to varying degrees, so that the stability factor of the foam is smaller than the attenuation factor, and the number of foams is gradually reduced.

it can also be used as high octane gasoline components, is an important raw material for organic chemicals. It can also be used to remove the bitumen of the body. The hospital pathology is primarily used for tissue, slice of pilot and dewaxing.

This product is the standard configuration of SCR technology, the solution concentration is 32.5% 0.7%, which can effectively reduce exhaust pollution and ensure engine efficiency ;8-stage pretreatment + RO reverse osmosis technology + EDI electrodeionization water purification technology + high-precision filtration and purification to ensure the purity of the solution from the source, Delay SCR scaling, protect the urea pump and pipeline; select ultra-high-purity urea particles, made through multiple purification processes, long-term maintenance of the system and catalyst activity, and prol

HCFC-141b (monofluorodichloroethane) is a high-purity liquid widely used in cleaning and solvent fields. Because its damage to the ozone layer is 1/10 of CFC-113, it is designated as an ideal substitute for fully halogenated chlorofluorocarbons. HCFC-141b is a widely used non-perhalogenated chlorofluorocarbon. Although its destructive effect on the ozone layer has been greatly reduced compared to fully halogenated chlorofluorocarbons, it can still cause damage to the ozone layer that is difficult to recover. As a result, its use is gradually being reduced around the world.

The industrial neighborl xylene is a raw material, first washes the acid layer to the acid layer colorless, then use 10% sodium hydroxide solution, water is washed to pass, and the aqueous layer is separated, and the calcium chloride is borned with anhydrous carbon. After the distinction is low, the intermediate fraction is collected, that is, a pure product.

Chemical reagents are relatively standard substances for chemical research, ingredient analysis, is an important condition for scientific and technological progress, which is widely used in the composition of material, other, qualitative and quantitative analysis.

Titanium dioxide is an inorganic, chemical formula TiO2, white solid or powdered amphoteric oxide, molecular weight 79.9, has non-toxic, optimal opacity, optimal whiteness and brightness, is considered to be the best in the world today A white pigment.

Carbonide is a kind of inorganic compound with CS2 chemical formula. It is a colorless liquid and is a common solvent.